Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Antioch
When a gate stops latching, drags on the driveway or refuses to open, you need someone who knows exactly what they’re looking at. We handle gate repair across Antioch, from the older tract neighborhoods near downtown to the hillside subdivisions off the Antioch/Oakley ridge. Our technicians have up to 11 years of experience, and we work on the brand you already have: Mighty Mule, LiftMaster, FAAC, BFT and more. Whether it’s a sagging side-yard gate or a commercial operator that won’t cycle, one call covers it. Call (855) 799-8573 for a free estimate.
Why Antioch Homeowners Call Gate Repair Antioch for Gate Repair
We’ve built a strong local reputation in Antioch by diagnosing first, then fixing. That means we assess what the gate actually needs rather than defaulting to a single operator ecosystem or pushing a replacement you don’t need. Homeowners and property managers around Antioch call us because we cover both the mechanical side and the automation side, so there’s no coordinating separate vendors for a hinge and a control board.
Antioch customers reach us easily because we know the area and its housing stock: late-1970s through 1990s tract homes with original builder-grade gate hardware, plus newer hill-area subdivisions with stucco-and-steel assemblies. That local knowledge saves time. We answer 24/7, and fast dispatch from 7am to 7pm gets a technician to most Antioch addresses the same day when the schedule allows. Every job starts with a free estimate, and the price is quoted and agreed before any work starts. No surprises on the invoice.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Welding in Antioch
Gate Welding in Antioch often comes down to failed joints and rusted frames rather than the whole gate giving out. A qualified technician checks the welds at the hinges, the latch post and any gusset plates, then repairs the joint rather than replacing the section. On older ornamental steel and wrought-iron gates in Antioch’s downtown pockets, that usually means grinding out a cracked weld and re-running it properly, then treating the bare metal so seasonal rain doesn’t start the corrosion again. Loose hinge bolts on wood gates get the same attention before anything structural is touched.
What a Weld Repair Covers
A weld repair typically re-secures a hinge plate, mends a cracked frame member or rebuilds a torn latch mount. The technician preps the joint, lays a full weld and checks the gate swings true once it cools. If the post itself has moved, welding alone won’t hold, so the post gets addressed first.
Rust and Corrosion Repair
Hot, dry Antioch summers and seasonal rain work on bare steel over time. A technician removes loose rust, welds in replacement steel where a section has thinned, and coats the repair so it lasts through another summer. Small rust spots caught early rarely need full replacement.
Commercial Gate Repair in Antioch
Commercial Gate Repair in Antioch covers the access gates that keep a business or HOA moving, and a downed gate there costs more than a slow morning. We work on sliding and swing operators, control boards, loop detectors and safety sensors for commercial systems, plus the mechanical side: bent tracks, worn rollers, failed hinges and posts that have shifted. Property managers around Antioch call us because access has to keep working during the repair, so the technician plans vehicle and pedestrian routing before the work starts. We work on LiftMaster and DoorKing among other brands, and we diagnose the fault rather than swapping parts until something works.
Keeping Access Open During the Work
A commercial gate that’s the only way in and out needs a plan. The technician works out how vehicles and people move through the site while the gate is offline, and where a swing or slide can be left partly usable, it’s left that way until the fix is finished.
Operator and Control-System Diagnosis
Commercial failures often trace to the control board, a loop detector or a safety edge rather than the motor. The technician tests each component in turn, so the actual fault gets fixed instead of guessed at.
Trusted Brands We Service in Antioch
Gate operators are not interchangeable, and guessing at unfamiliar equipment wastes everyone’s time. We work on the brands Antioch homeowners and property managers actually have: Mighty Mule on many residential driveways, LiftMaster and Linear on garage-adjacent and side-yard gates, and FAAC and BFT on heavier automated systems. We don’t claim to stock parts for every model, but we know these systems well enough to diagnose the fault on the first visit and get the right part ordered without a second trip to figure out what’s wrong. From broken hinges to failed operators, the goal is simple: gate back in service.
Common Gate Repair Problems We See in Antioch Homes
- Hinge posts heaving from expansive clay soil. Antioch’s shrink-swell soil swells in winter and shrinks in summer, tilting posts that were set too shallow. The gate then sags and drags on the pavement, and adjusting the gate alone won’t hold.
- Wooden gates warping and hinge bolts loosening. Hot, dry summers near 100°F and afternoon Delta winds dry out wood and work hinge bolts loose over a season. Left alone, the gate racks and starts binding in its swing arc.
- Shallow post footings in older tract homes. Many late-1970s through 1990s Antioch homes have posts that were never set deep enough for the local soil. Those gates bind in the slide track or swing short of the latch as the ground moves.
- Automatic gates failing to reverse. A gate that won’t reverse on contact is a safety problem, not just an annoyance. Safety sensors, loop detectors and control boards are common culprits, and they need a trained technician to test properly.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Antioch, CA
Pricing is per job, set by the written estimate and quoted before any work starts. A typical hinge and post repair in Antioch runs $180 – $340 when the post only needs re-setting and a hinge or two added. A slide-track correction or realignment on a dragging gate usually falls between $150 and $300. Welding and rust repair on steel gates runs roughly $125 – $275 depending on how much metal needs replacing. Automated gate repair, covering motor, operator or control-board diagnosis, typically runs $200 – $450 for the repair itself, with parts quoted separately. In the hillside subdivisions off the Antioch/Oakley ridge, deeper post footings and added hinges can push a post job toward the upper end, because that fix holds where a simple adjustment won’t. Estimates are free.
We Also Serve Cities Near Antioch
We also take gate repair calls in the towns around us: Oakley, Brentwood, Clayton and Discovery Bay. If you’re just outside Antioch, call and we’ll confirm whether we can reach you. Our gate repair service covers the same range of manual and automated gates throughout the area, and the estimate works the same way wherever you are.
Serving Antioch, CA – Our Local Coverage Area
We serve Antioch and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Antioch
Because the hinge post has heaved or tilted out of plumb as Antioch’s expansive clay soil shrinks in the dry season. A technician re-sets the post deeper and adds hinges so the gate swings true, which is a fix rarely needed in neighboring cities with more stable soils. Call (855) 799-8573 for a free estimate.
Yes, and we plan around tight access so the driveway stays usable while we work. Shared driveways and rights of way are common in Antioch, so the technician checks the track and posts with the neighbor’s access in mind and keeps at least one route open. Call (855) 799-8573 to book a free estimate.
Yes. A gate that won’t reverse on contact can crush or trap someone, so stop using it until a technician checks it. Safety sensors, loop detectors and control boards are the usual causes, and they need proper testing rather than a guess. Call (855) 799-8573 for a free estimate.
By digging out the old post and setting a new one to proper footing depth, then re-hanging the gate and correcting the sag. In Antioch, a post set too shallow will heave again after one wet winter, so the fix has to go below the active soil layer. Call (855) 799-8573 for a free estimate.
Yes. We work on LiftMaster and FAAC operators along with BFT, Mighty Mule and other common brands, so there’s no sending you elsewhere for an unfamiliar system. The technician diagnoses the fault first, then quotes the repair. Call (855) 799-8573 for a free estimate.
Get Your Antioch Gate Fixed
If your gate is dragging, failing to latch or refusing to cycle, don’t wait for a bigger bill. Call Gate Repair Antioch at (855) 799-8573. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, so same-day service is often possible. Estimates are free, and the price is quoted and agreed before any work starts. From broken hinges to failed operators, one call covers it.
Written by the team at Gate Repair Antioch.