Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Electric Gate Repair for Antioch Homeowners
When an automated gate stops mid-travel, opens for no reason, or refuses to close at all, the problem is almost never the gate panel itself. It’s the operator, the control board, the safety loops, or the wiring feeding them. Our technicians have up to 11 years of experience diagnosing exactly that kind of failure, and we work on the brand you already have instead of steering you toward a replacement you don’t need. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday, so same-day electric gate repair in Antioch is often possible when you call early. One call covers it: mechanical work, automation, and access control. Reach us at (855) 799-8573.
Gate Opener Repair
Gate Opener Repair is the work of getting the drive unit itself – the motor, gearbox, limit switches, and the board that commands them – functioning correctly again. You need it when the gate moves sluggishly, stops partway, reverses without warning, or the opener hums but nothing happens. At Gate Repair Antioch, we diagnose first and then fix, so the parts we replace are the ones actually failing rather than a guess. Typical opener repairs run roughly $180 to $340 depending on the operator and what’s worn, and the written estimate sets the final price before any work starts. We service LiftMaster and FAAC units as readily as older equipment.
Arm and Slide Opener Diagnosis
Articulated arm and slide-mounted openers wear differently, and the fault often hides in the linkage rather than the motor. We test travel limits, listen to the gearbox under load, and check the mounting for movement that throws off alignment. Catching a worn arm early saves the motor from working against itself.
Control Board and Limit Switch Faults
A board that has taken a surge or a limit switch that no longer registers will leave a gate stuck in one position. We meter the board, check the switch contacts and the wiring between them, and confirm the fix holds through a full open-and-close cycle. Diagnostics come before parts, every time.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Automatic Gate Repair
Automatic Gate Repair covers the whole automated system, not just the motor: the operator, the sensors, the detection loops in the driveway, and every connection in between. It’s what you call when a gate that used to work smoothly now behaves erratically or shuts down entirely. We approach every job brand-agnostic, assessing what the gate actually needs rather than defaulting to one ecosystem. Most automatic gate repairs fall in the $200 to $450 range depending on the fault, and the price is agreed before we begin. This is the same work our electric gate repair team handles across the region.
Safety Sensor and Photo Eye Checks
A misaligned or dirty photo eye is one of the most common reasons an automatic gate refuses to close. We clean, realign, and test the beam through its full range, then confirm the reverse function triggers as it should. Safety devices are not optional, and we treat them that way.
Loop Detector and Wiring Troubles
Driveway loops sense a vehicle and tell the gate to open or hold; when the loop or its lead-in wire fails, the gate either ignores traffic or closes on it. We test the loop with a meter, inspect the splice points, and trace the wiring back to the board. A clean splice or a fresh loop restores normal behavior.
Electric Gate Motor
The Electric Gate Motor is the drive unit that physically moves the gate, and when it fails the whole system goes down with it. You need motor attention when you hear grinding, smell overheating, see the gate slow under its own weight, or notice the motor straining against an obstruction that isn’t there. We diagnose the motor alongside the mechanical gate, because a binding hinge or a bent track will wear out a healthy motor fast. Motor-related repairs typically run $250 to $500 depending on the make and the parts needed, with the written estimate fixing the final figure. We work on BFT and Mighty Mule motors among others.
Motor Overheating and Strain
A motor that runs hot is fighting something – a tight hinge, a misaligned track, or a load it wasn’t sized for. We find the source of the strain before the motor burns out. Left alone, an overheating motor usually ends in a full replacement.
Gearbox Wear and Drive Components
Gears, sprockets, and drive chains wear gradually, and the first sign is often a grinding note or a gate that moves in jerks. We open the drive housing, inspect the wear points, and replace what’s failing. Addressing gearbox wear early keeps the entire operator in service longer.
Gate Access Control
Gate Access Control is the layer that decides who gets through: keypads, card readers, intercoms, remote receivers, and the entry devices that signal the operator. You need it looked at when a keypad stops accepting codes, remotes work intermittently, or an entry system lets the wrong people in. We diagnose the access hardware and its wiring as one system, so a failed receiver doesn’t get mistaken for a failed operator. Access control repairs generally run $150 to $400 depending on the device and wiring involved, and the estimate is set before work begins. This matters for HOAs and property managers across Antioch as much as for single homes.
Keypad and Reader Communication
Keypads and card readers fail in predictable ways: dead buttons, forgotten codes, or a reader that no longer talks to the controller. We test each device, verify its wiring, and confirm credentials register correctly. Getting entry devices reliable again is often a quick, targeted fix.
Remote and Receiver Pairing
When remotes stop working, the problem is usually the receiver, the antenna, or a battery, not the operator. We pair new remotes, test range through the gate’s full travel, and check that the receiver isn’t dropping signal. Reliable remotes make the whole system feel dependable again.
Commercial Gate Operator
A Commercial Gate Operator is the heavy-duty automation built for frequent cycles, heavier panels, and the volume a business, HOA, or multi-unit property puts through a gate every day. You need commercial attention when the gate cycles constantly, when a single failure would block access for many users, or when an older operator has reached the end of its service life under constant use. We handle both residential and commercial systems, so a property manager doesn’t need a separate vendor for automation and mechanical work. Commercial operator repairs typically run $300 to $700 depending on the unit and what’s failed, with the price confirmed in writing first. DoorKing and LiftMaster commercial units are common in our work.
High-Cycle Duty and Operator Sizing
A residential operator pushed into commercial duty wears out early, and the symptoms look like random failures. We assess the cycle count against the unit’s rating and recommend the right class of operator when a replacement makes more sense than another repair. Matching the operator to the traffic prevents repeat breakdowns.
Access Logging and Multi-User Control
Commercial gates often need to track who came through and when, plus manage many credentialed users. We check the controller, the logging function, and the entry devices together so the record stays accurate. Property managers get a system that reports correctly, not just one that opens.
Brands We Service
We work across the major gate automation brands, and that breadth is the point. On LiftMaster equipment we know where the board and limit logic tend to fail, and we service FAAC operators understanding how their control architecture behaves under load. BFT units get the same attention to their drive components, and older Mighty Mule residential operators are diagnosed with an eye for the wear points that show up first. Nine major brands in all: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When a gate fails, you shouldn’t have to hunt for the one contractor who handles your make.
That brand-agnostic approach means we diagnose what the gate actually needs rather than defaulting to one ecosystem. If you’re unsure what you have, we identify it on site and explain the failure in plain terms. From broken hinges to failed operators, the diagnosis comes first and the fix follows. Whether you have LiftMaster, FAAC, or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- The gate reverses or stops mid-travel. A gate that reverses without an obstruction usually has a failing safety device or a control fault. This is a hazard, not a quirk, and it needs a technician before someone gets caught.
- The operator hums but the gate doesn’t move. A humming motor points to a seized gearbox, a broken drive component, or a binding gate. Running it in this state can burn out a motor that was otherwise repairable.
- You smell burning or see smoke at the control box. Overheating electronics or wiring can fail completely or, worse, start a fire. Shut the power off at the breaker and call a professional rather than testing it yourself.
- The gate won’t close, or closes on vehicles. Failed loops, photo eyes, or limit switches cause this, and a gate that closes on traffic is dangerous. Stop using the automation until it’s checked.
- The gate drags, scrapes, or comes off its track. Mechanical binding and off-track panels put heavy load on the operator and can drop a gate. This needs hands-on inspection, not a remote reset.
Our Process, Step by Step
- 1
Call and describe the symptom. We ask what the gate is doing and what brand it is, so we arrive prepared. We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
- 2
On-site diagnosis. We test the operator, the control board, the sensors, the loops, and the mechanical gate together, because a fault in one often shows up as a symptom in another. We use meters and test cycles, not guesswork.
- 3
Written estimate before any work. You get the diagnosis in plain language and a written price for the repair. Nothing starts until you agree to it, so there are no surprises on the invoice.
- 4
The repair itself. We replace only the parts that have failed, adjust limits and sensors, and confirm the gate runs a full open-and-close cycle. Mechanical and automation work happen under one roof, so nothing gets handed off.
- 5
Final test and walkthrough. We run the gate through several cycles with you watching, confirm the safety devices work, and explain what we did. If the fix involves a part we need to source, we tell you the timeline up front.
How Much Does Electric Gate Repair Cost in Antioch?
Electric gate repair in Antioch typically runs from about $150 to $700 depending on the fault, the brand, and whether the problem is mechanical, electrical, or both. A simple sensor realignment or remote pairing sits at the low end, around $150 to $250. A failed control board or opener repair usually lands between $180 and $340. Motor and drive-component work tends toward $250 to $500, and a commercial operator with heavy-duty parts can reach $300 to $700. These are typical estimates; the written estimate you receive after diagnosis sets the final price, and it’s agreed before we start.
Several things move the number. The brand and age of the operator affect parts availability, and so does whether the gate also has mechanical problems like a bent track or worn hinges. Access control devices – keypads, readers, receivers – add to the scope when they’re part of the fault. A gate that’s been failing for a while often has more than one issue by the time it’s inspected.
To avoid overpaying, get a diagnosis before agreeing to parts, and be wary of anyone who quotes a repair without looking at the gate. A free estimate from us includes the diagnosis and a written price, so you know what you’re paying for and why. Call (855) 799-8573 for an exact quote – estimates are free.
Our Service Area Near Antioch
We serve Antioch and the surrounding East Contra Costa communities, including Brentwood, Oakley, Clayton, Discovery Bay, Blackhawk, Camino Tassajara, Walnut Creek, Contra Costa Centre, and Rio Vista. Dispatch runs 7am to 7pm, Sunday through Friday, so nearby towns on that side of the county are usually reachable the same day when you call early. For our electric gate repair in Brentwood and electric gate repair in Oakley, the process is the same: diagnose first, then fix. Wherever you are near Antioch, gate repair Antioch starts with a single call.
Serving Antioch, CA – Our Local Coverage Area
We serve Antioch and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Electric Gate Repair in Antioch
Electric gate repair is the diagnosis and fixing of automated gate systems – the motor, operator, control board, sensors, loops, and access devices that open and close the gate. It differs from manual gate repair because the fault usually involves electronics or wiring, not just hinges and welds. We handle both, so a single visit can cover an automated system and its mechanical parts. Call (855) 799-8573 for an exact quote – estimates are free.
Most electric gate repairs are completed in a single visit, often within a couple of hours once the fault is identified. Simple fixes like sensor realignment or remote pairing are quick, while a control board replacement or motor work can take longer if a part needs sourcing. We give you a realistic timeline after diagnosis. Call (855) 799-8573 to book a visit.
Typical electric gate repairs in Antioch run from about $150 to $700, depending on the fault, the brand, and whether mechanical work is involved. Sensor and access-device fixes sit at the low end, while motor and commercial operator work reach the higher end. The written estimate sets the final price and is agreed before any work starts. Call (855) 799-8573 for a free estimate.
Yes, we service LiftMaster along with FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Our technicians work on the brand you already have rather than pushing one ecosystem. If you’re unsure what your operator is, we identify it on site. Call (855) 799-8573 and tell us what the gate is doing.
Same-day electric gate repair in Antioch is often possible when you call early. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (855) 799-8573 to check availability.
Warranty terms are set per job and confirmed with your written estimate, so you know what’s covered before we start. Parts and labor coverage depends on the repair and the components involved. Ask us about coverage for your specific repair when we provide the estimate. Call (855) 799-8573 with questions.
Clear access to the gate, the operator, and the control box so the technician can reach everything safely. Note what the gate is doing and when it started, and have any remotes, codes, or manuals handy if you have them. Shut off power at the breaker if you smell burning or see smoke. Call (855) 799-8573 to schedule.
Schedule Your Electric Gate Repair Service in Antioch Today
Don’t let a failing gate sit half-working. Call (855) 799-8573 and we’ll diagnose the problem, give you a written price, and get your gate back in service. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free and there’s no obligation – one call covers the diagnosis and the fix.
Written by the team at Gate Repair Antioch.