Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Antioch
If your driveway gate has stopped opening, is grinding at the halfway point, or drags against the pavement, you’re in the right place. We handle electric gate repair in Antioch for homeowners and property managers, and one call covers the whole job: the operator, the control board, the safety sensors, and the gate itself. Our technicians have up to 11 years of experience, and they work on the brand you already have rather than pushing you toward a single ecosystem. Call (855) 799-8573. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
Antioch has a way of punishing gates that weren’t built for it. More on that below, because it changes how we diagnose a failure here.
Why Antioch Homeowners Call Gate Repair Antioch for Electric Gate Repair
Most of what goes wrong with an electric gate in Antioch isn’t an electronics problem at all. It’s the ground underneath the gate. Across the city’s tract homes, posts were commonly set on footings that weren’t deep enough for the shrink-swell clay this region sits on. That clay swells in winter rain, then shrinks hard through the long dry summer, and the hinge post slowly heaves and tilts. The gate racks. The operator keeps straining against a panel that’s now out of alignment until the arm binds or the board trips. A technician who only reads the error code will sell you a motor you don’t need.
We diagnose first, then fix. That means checking post plumb and hinge condition before we ever touch the operator. We work on both residential and commercial systems, so HOA board members and business property managers get the same methodical approach as a homeowner with a single side-yard gate. We can’t quote you a review count we haven’t verified, and we won’t invent one. What we can tell you is that Antioch is one of the areas we know best, and neighbors tend to call back when the diagnosis holds up.
If you’re in the hillside subdivisions off the Antioch/Oakley ridge, you’ve probably watched a gate start dragging by late summer. That’s the pattern here. Hot, dry afternoons near 100°F and afternoon Delta winds dry out and warp wood panels and loosen hinge bolts, while the soil movement underneath does the structural damage. Both problems land in the same place: a gate that no longer sits square in its opening.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Opener Repair in Antioch
Gate Opener Repair in Antioch starts with the swing arm, the slide rack, or the operator housing, because those are the parts that take the punishment when an Antioch gate has gone out of plumb. A typical opener repair here runs $180-$450, depending on whether it’s a worn drive gear, a failed limit switch, or an arm that needs realigning after we’ve corrected the gate. On the hillside side of town, the operator often fails first because the gate has been fighting it for months. On older chain-link and wrought-iron setups downtown, it’s usually a worn sprocket or a motor that’s simply tired.
Opener arm and drive train
The arm and drive train do the actual lifting and pulling, so they wear long before the motor does. When a swing arm is misaligned against a racked gate, the operator strains to compensate and trips its internal limit. We realign the arm to the corrected gate position rather than replacing the whole unit.
Limits, sensors, and the operator controller
Limit switches tell the operator when to stop, and when they drift, the gate overruns or reverses on its own. We calibrate those against the actual travel of your gate, then test the photocells so a stale sensor doesn’t keep interrupting a repair we’ve already finished.
Automatic Gate Repair in Antioch
Automatic Gate Repair in Antioch covers the full system – operator, control board, keypad, safety photocells, and loop detector – not just the motor. When an Antioch homeowner tells us the automatic gate “works sometimes,” the cause is usually a loop detector that’s lost its sensitivity after years of soil movement, or a control board with a failing relay. Automatic gate repair here typically runs $220-$600. Board-level work on a modern unit is at the lower end; replacing a discontinued board on a legacy system pushes it higher.
Control boards and inaccessible entry
Older Linear, FAAC, and BFT boards on gate systems installed back in the tract-home era often have no replacement parts available anymore. We test the board directly rather than guessing from the symptom, and we tell you honestly when a board can be repaired and when it can’t.
Entry keypads and remotes
Keypads and remote receivers on older systems lose their programming when the internal battery or memory fails. We re-pair remotes, replace failed keypads, and make sure the entry sequence works reliably for every vehicle in the household.
Trusted Brands We Service in Antioch
We work on the brand you already have, which matters in a market full of legacy operators still doing daily duty. Our technicians carry working knowledge of LiftMaster, FAAC, BFT, Mighty Mule, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule across the full range of residential and commercial systems. That means no sending you elsewhere because your operator isn’t the one brand a shop happens to sell. We don’t claim to stock parts at a warehouse, but we know these boards and mechanisms well, so diagnosis is fast and the repair path is usually clear on the first visit.
Common Electric Gate Repair Problems We See in Antioch Homes
- Hinge posts heaved by expansive clay. The post tilts through the seasons, the gate racks, and the operator binds even though the panel itself is sound. The fix starts at the footing, not the motor.
- Obsolete control boards on legacy operators. Old Linear, FAAC, and BFT units sometimes run entrapment protection that no longer meets UL 325 requirements, and replacement parts are often gone.
- Warped wood panels and loosened hinge bolts. Hot, dry summers and Delta winds dry out timber gates and back out bolts, throwing off alignment and making loop detectors and keypads unreliable.
- Gates dragging by late summer. Shrink-swell soil closes the gap between panel and pavement as the ground moves; a gate that cleared in spring often scrapes by August.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Antioch, CA
Here’s what electric gate repair generally runs in Antioch. Opener repair is typically $180-$450. Automatic gate system repair, including control board and sensor work, typically runs $220-$600. Post re-setting and hinge correction, where the clay has done the damage, adds to that because it’s real footing work. A remote or keypad replacement is usually modest on its own. What moves the number is always the same: is the gate itself sound, and are parts still available for the operator. Every estimate is free, written, and quoted before any work starts, so the invoice you get matches the number you agreed to. Call for an exact figure.
We Also Serve Cities Near Antioch
Antioch sits at the eastern end of the Diablo Range foothills, and the surrounding communities see the same clay and the same aging gate hardware. We serve Antioch along with Oakley, Brentwood, Clayton, and Discovery Bay. If you’re just outside the city line, call and we’ll talk through your gate over the phone first. Visit our electric gate repair page for the broader service overview.
Serving Antioch, CA – Our Local Coverage Area
We serve Antioch and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Antioch
It can often be repaired, but the answer hinges on parts availability and the condition of the gate. If the operator is a legacy Linear or FAAC unit whose control board has no replacement parts left, repairing it isn’t practical, and retrofitting a modern operator onto a sound gate usually makes more sense than sourcing obsolete parts. If the board is available and the gate is true, repair is the cheaper path. We diagnose first and tell you which one you’re looking at. Call (855) 799-8573 for a free estimate.
Because the expansive clay soil under Antioch heaves in winter rain and shrinks hard through the dry summer, and a hinge post set on a shallow footing tilts with it. The gate racks out of plumb and starts scraping. It’s rarely rust. The fix usually starts at the post footing, not the panel. Call for a free on-site look.
Yes, if your gate is automated, modern UL 325 entrapment protection requirements call for functioning safety sensors, and older systems often run components that no longer meet them. We test the photocells and loop detector as part of any automatic gate repair and tell you plainly what needs to come up to standard. Call (855) 799-8573 to book an assessment.
Check where the gap closes: a sag at the hinge post is a post or footing problem, while a dip in the middle of the panel usually means the gate frame or hinges have worn. Either way, the operator downstream is affected. We diagnose the exact point of failure before quoting. Estimates are free.
Often yes, if the gate frame and posts are sound. The honest decision is whether the gate is worth automating with a new operator or whether the clay-heaved posts and obsolete board make a full replacement the cheaper answer over time. We lay out both paths in the written estimate so you can choose with the numbers in front of you.
Get Your Antioch Gate Back in Service
From broken hinges to failed operators, one call covers it. If your gate in Antioch is dragging, binding, or refusing to open, call (855) 799-8573 for a free estimate. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. The price is quoted and agreed before any work starts.
Written by the team at Gate Repair Antioch.