Gate Installation Cost in Antioch - Typical Prices, Then a Free On-Site Estimate

Typical price ranges for the work, then a free on-site estimate and a written quote for your driveway. Site prep, power runs and safety gear priced in, not added later.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (855) 799-8573

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 Upfront Pricing · Free Estimates
Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Questions about your gate repair?Free estimate, price agreed before work starts
Call (855) 799-8573

How Much Does Gate Installation Cost in Antioch?

Gate installation in Antioch typically runs $2,400 to $6,800 for a standard residential swing gate with a new automation operator, including materials and labor. A basic manual gate on an existing post line usually lands between $1,100 and $2,600, while a heavy commercial slide gate with loop detectors and safety sensors generally starts around $8,000 and climbs past $18,000. Every job is priced per job from a free written estimate, so those ranges are the typical band, not a quote.

Those numbers surprise people, and the reason is simple: a gate is two purchases at once. You’re buying the physical gate (posts, frame, infill, hardware, finish) and, if the gate will open on its own, you’re buying an automation system (operator, control board, safety devices, power run). Most of the sticker shock in Antioch comes from the second half, which homeowners don’t see when they picture “a new gate.”

Key Takeaways

  • Typical installed range for a residential swing gate with automation: $2,400-$6,800.
  • Manual gate on existing posts: often $1,100-$2,600.
  • Commercial slide gate with safety and detection devices: commonly $8,000-$18,000+.
  • Automation and power are usually the biggest swing factor in the estimate, not the gate panels.
  • We work on the brand you already have, and we install across nine major automation brands, so you’re not locked into one ecosystem.

Gate Installation Cost Breakdown (2026)

Here’s how a full installation estimate typically breaks down for the Antioch market. Line items are estimated ranges; the written estimate you receive on site sets the final price.

Line Item Typical Range What It Covers
Gate panels & frame $900 – $3,200 Steel, aluminum, or ornamental infill; sized to the opening
Posts & footing prep $350 – $1,200 Set to proper footing depth; concrete and hardware
Mechanical hardware $150 – $650 Hinges, latches, rollers, track or swing hardware
Swing or slide operator $700 – $2,400 Automation unit; brand and capacity vary
Control board & safety devices $300 – $1,100 Photo eyes, safety sensors, loop detectors
Power run & wiring $400 – $1,800 Getting power to the operator location; distance and route matter
Labor & commissioning $600 – $1,500 Installation, alignment, testing, programming the operator
Site visit & estimate Free We look at the opening, posts, and power before quoting

What drives a quote up: a gate that’s heavier than a standard residential panel, a power run that has to cross a driveway or travel a long distance to the operator, a slide gate that needs in-ground loops for vehicle detection, and commercial openings that carry heavier traffic and demand faster open-and-close cycles. What drives it down: reusing sound existing posts, choosing a manual gate for a rarely-used side yard, and matching the operator to the actual gate weight instead of oversizing it “just in case.” Diagnose first, then fix – and in the case of a new install, we size the equipment before we quote, not after.

Want to talk it through?Free estimate, price agreed before work starts
Call (855) 799-8573

What Affects Gate Installation Pricing in Antioch

  • Gate type and material. A steel ornamental gate weighs and costs more than an aluminum one, and heavier panels require a heavier-duty operator to move them safely. Material choice usually shifts the panel line item by several hundred dollars on its own.
  • Swing versus slide. Slide gates need track or cantilever hardware and, on driveways, vehicle detection loops; swing gates need sturdy hinge posts and room to swing clear. The mechanical hardware and operator lines differ a lot between the two, and that’s often the biggest single split in an estimate.
  • Power availability. Automation needs power at the operator. If a panel is close, the wiring run is short; if the operator sits far from the power source, the run gets longer and costlier. Electrical work is a job for a licensed electrician, and we’ll flag it during the site visit so it isn’t a surprise later.
  • Permits and local requirements. Most cities require a permit for a new gate or fence installation, and some require one for the automation and electrical hook-up as well. Ask the City of Antioch building department what applies to your property before work starts; permit fees are a pass-through cost, not part of our labor line.
  • Automation brand and features. A basic swing operator costs far less than a unit with battery backup, smartphone control, or commercial-grade cycle ratings. We program across LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we’ll recommend a unit that matches your gate rather than force a brand you didn’t ask for.
  • Site conditions. Antioch’s hot, dry summers and the clay-heavy soil found across much of east Contra Costa County both shape a gate install. Dry summer ground can be hard digging for post footings, and clay holds moisture in the rainy season, so posts go to proper footing depth to keep the gate square and the operator aligned over time. That footing prep is part of why a “cheap” gate sometimes isn’t cheap once it’s set correctly.

How to Save on Gate Installation

You don’t have to spend top of the range to end up with a gate that works reliably. A few practical choices move the number in the right direction.

  • Reuse sound posts where they exist. If the existing hinge or latch posts are solid and square, keeping them can remove the footing and hardware prep from the estimate. We check them first before recommending replacement.
  • Go manual where automation isn’t needed. A rarely-used side yard or a gate that gets opened a couple of times a day may not justify an operator. You can always add automation later, and the gate panels themselves don’t change.
  • Match the operator to the gate, not above it. Oversizing an operator adds cost you never get back. The right-size unit handles the gate weight and cycle count without extra capacity you won’t use.
  • Group mechanical and automation work into one estimate. Because we handle manual repair, electric and automated systems, and new installation, one call covers it. You avoid paying two contractors to coordinate the same opening.
  • Get the site visit and estimate before you buy anything. The most reliable way to control cost is to know the number up front. Estimate visits are free. Call (855) 799-8573 to set one up. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Need a price for your gate repair?Free estimate, price agreed before work starts
Call (855) 799-8573

Is gate installation different from gate repair on price?

Yes, and it helps to know which one you actually need. Repair pricing is scoped to the failed part: a hinge, a latch, a motor, a control board, or a safety sensor. Installation pricing is scoped to the whole assembly, so materials and power make up a much larger share of the estimate.

If your current gate is sound but its operator has failed, a repair is usually the smaller number. If the gate itself is leaning, rusted through, or sized wrong for the opening, a replacement is the more durable path. We diagnose first, then fix, so you’re not quoted a new install when your existing gate just needs a motor and a control board. If you’re working through a failing system rather than a fresh install, see our gate repair Antioch page for the repair side of the pricing, and if you’re getting oriented to Antioch, that’s where a lot of these installations happen – from driveways off neighborhood streets to HOA entrances and commercial lots.

How long does a gate installation take?

Most residential installations are completed in one to two days once the equipment is on hand and the footing has cured. A manual gate on existing posts can often be finished in a single visit. Automated gates take longer because the operator has to be mounted, wired, programmed, and tested against its safety devices, and that final testing is not something to rush.

Commercial slide gates and larger residential openings can run longer, especially when vehicle loops have to be cut and set into the driveway. We’ll give you a realistic timeline with the written estimate, not a guess at the door.

Can one contractor handle both the gate and the automation?

Yes, and this is exactly why we do all three: gate repair, electric gate repair, and installation. It’s common for a homeowner to buy the gate from one company and the operator from another, then discover nobody wants to own the interaction between them when something misbehaves. When the mechanical gate and the automation are sized and installed together, the alignment, the safety devices, and the operator limits are set as one system.

That matters most with sliding gates and with any automated gate on a driveway, where a mis-set limit or a poorly aligned panel can trip a safety sensor and leave the gate stuck open. One call covers it. Whichever brand you already have, or whichever brand you choose, we work on the brand you already have and install across the nine major operators we service.

FAQs – Gate Installation Cost

How much does a basic gate installation cost in Antioch?

A basic manual residential gate in Antioch typically runs $1,100 to $2,600 installed, and a standard swing gate with a new automation operator usually lands between $2,400 and $6,800. The final number depends on gate material, post condition, and how much power work the operator needs. Call (855) 799-8573 for an exact quote – estimates are free.

Can you install an automatic gate operator on my existing gate?

Often yes, usually in the $1,200 to $4,000 range for the operator, controls, safety devices, and labor, depending on the gate’s weight and the power run. A sound existing gate with solid posts is a good candidate for adding automation. We’ll check the posts, hinges, and swing or slide clearance on the site visit before quoting. Call (855) 799-8573 and we’ll set up a free estimate.

Questions about your gate repair?Free estimate, price agreed before work starts
Call (855) 799-8573

Is it cheaper to repair or replace a gate?

Repair is cheaper when the gate’s structure and posts are sound and the failed part is mechanical or electronic, often $150 to $1,200 depending on the part. Replacement makes more sense when the gate is bent, rusted, or undersized for the opening, where the installed cost is typically $1,100 and up. We diagnose first, so you’re not sold a replacement you don’t need. Call (855) 799-8573 for a free estimate.

Do I need a permit for a new gate in Antioch?

Most cities require a permit for a new gate or fence installation, and some require one for the automation and electrical work too. Permit fees typically add a few hundred dollars to the project and are separate from the install labor. Ask the City of Antioch building department what applies to your property, and check that the technician doing the electrical portion is licensed. Call (855) 799-8573 and we’ll walk through the scope before you file.

What brands of gate automation do you install?

We install and program across nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That means you can choose the operator that fits your gate and budget instead of being pushed toward a single ecosystem. Call (855) 799-8573 and we’ll recommend the right unit for your opening.

Can you come today?

Same-day site visits are often possible depending on scheduling. We answer 24/7, and our dispatch runs 7am to 7pm, Sunday through Friday, so call early in the day and we’ll do our best to get a technician out to quote your installation. Call (855) 799-8573 to check the next opening.

What Happens When You Call

When you call, we ask a few questions about the opening: the width, whether it’s a swing or slide gate, whether power is already at the operator location, and whether you already have a gate that’s failing or you’re starting from scratch. That lets us set the right site visit and come prepared to quote both the mechanical and automation sides in one estimate. If your gate has stopped working entirely, tell us that up front – gate back in service is the goal, and a repair may be the right answer even when a new install feels inevitable.

Our technicians have up to 11 years of experience, handle residential and commercial systems, and cover the full range from broken hinges to failed operators. We don’t guess at unfamiliar equipment; we diagnose what the gate actually needs and quote it in writing. The written estimate is what sets your final price, and it’s free.

Ready for a Free Installation Estimate?

Call (855) 799-8573 to schedule a free on-site estimate for your gate installation in Antioch. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Whether you’re replacing a bent gate, adding automation to a gate that’s already in place, or fitting out a commercial entrance, one call covers it – from the first look to gate back in service.

Pricing reflects the Antioch market as of 2026. Gate Repair Antioch offers free estimates – call (855) 799-8573.

Written by the team at Gate Repair Antioch.

What Our Customers Say

★★★★★ 4.8 from 6+ reviews

"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."

- Tara Walsh

"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."

- Neil Patel

"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."

- Adriana Ramirez
Need Gate Repair help in Antioch? Licensed & insured · 30-60 min response · free estimates
Call (855) 799-8573

Request a Free Estimate

Tell us what's going on in Antioch. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7