Gate Repair Cost in Antioch - Typical Prices, Then a Free On-Site Estimate

Typical price ranges for the work, then a free on-site estimate and a written quote for your driveway. Site prep, power runs and safety gear priced in, not added later.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (855) 799-8573

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 Upfront Pricing · Free Estimates
Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Questions about your gate repair?Free estimate, price agreed before work starts
Call (855) 799-8573

How Much Does Gate Repair Cost in Antioch?

Gate repair in Antioch typically runs $150 to $650 for mechanical fixes like hinges, latches, rollers and bent frames, while electric gate repair on the operator, motor or control board usually lands between $275 and $1,200. A failed control board or a full operator replacement sits at the top of that range, and a simple hinge or latch job sits at the bottom. We give you a written estimate before any work starts, so the number you agree to is the number you pay.

Antioch gates take a specific kind of beating. Long dry summers followed by wet winters work on wood frames and steel posts alike, and plenty of the properties here have older automatic systems that were installed years ago and never serviced. When we pull up on-site, we diagnose first, then fix. That order matters, because a gate that looks like it needs a new motor often just needs a safety sensor realigned or a limit switch reset. One call covers it whether your gate is manual or electric, residential or commercial.

Key Takeaways

  • Typical mechanical gate repair in Antioch: $150 to $650.
  • Typical electric or automated gate repair: $275 to $1,200, driven mostly by the operator brand and the part that failed.
  • We work on nine major automation brands, so we’re not guessing at unfamiliar equipment.
  • Every estimate is free, and the price is set per job by the written estimate.
  • Our technicians have up to 11 years of experience across manual and automated systems.

Gate Repair Cost Breakdown (2026)

These are typical estimated ranges for the Antioch market. Your written estimate sets the final price, because two gates that show the same symptom can need very different parts once we’re standing in front of them.

Repair Type Typical Estimated Range
Hinge, latch or handle repair/replacement $150 – $320
Roller, track or wheel repair (sliding gates) $180 – $400
Gate sag, post or frame straightening $220 – $550
Gate alignment and adjustment (drag, sticking, off-track) $150 – $350
Safety sensor or photo-eye replacement $200 – $425
Loop detector or vehicle sensor repair $275 – $600
Control board or receiver replacement $350 – $750
Motor or operator repair (brand dependent) $400 – $950
Full operator replacement (automation system) $750 – $1,200+
Remote, keypad or entry device programming/replacement $90 – $280

What pushes a bill toward the top of these ranges is usually the operator itself. Mechanical work on a manual gate is straightforward and priced accordingly. The moment an automated system is involved, the cost depends on the brand, whether the part is the motor, the board, or a sensor, and how accessible the operator is. A LiftMaster or Linear residential operator is generally more straightforward to source parts for than a FAAC or BFT commercial unit, though we handle all of them. What brings a bill down is catching a problem early: a dragging gate that gets adjusted today is a cheap fix, while the same drag left alone wears out the motor and becomes two repairs.

If you want the full picture of what we do beyond pricing, our gate repair page covers the mechanical and electrical work in detail.

Want to talk it through?Free estimate, price agreed before work starts
Call (855) 799-8573

What Affects Gate Repair Pricing in Antioch

No two gates fail the same way, and the price moves with a handful of practical factors. Here’s what we weigh when we quote.

  • Manual vs. electric. A manual gate problem is hinge-and-weld territory and prices at the lower end. An automated gate adds an operator, a control board, sensors and wiring, and that’s where cost climbs. Electric gate repair covers motors, boards, loop detectors and safety sensors, not just the mechanical parts.
  • Operator brand and part availability. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule, and parts pricing and availability differ by brand. A common residential operator part is usually quicker and cheaper to sort than a commercial DoorKing or FAAC control component.
  • Gate material and weight. Heavier steel and wrought-iron gates load the hinges, rollers and motor harder than lightweight aluminum or wood. A sagging heavy gate may need post reinforcement as well as hinge work, which adds labor.
  • Residential vs. commercial. Commercial gates carry more traffic, are built heavier, and often have access-control systems (keypads, intercoms, loop detectors). HOA and business property managers get the same diagnose-first approach, but the scope is bigger.
  • Access and site conditions. A gate set back on a long driveway, buried in landscaping, or with wiring that’s hard to trace takes more time to reach and diagnose than one right at the curb. That time is part of the estimate, not a surprise on the invoice.
  • Whether it’s a repair or a replacement. Age and wear decide this more than anything. A twenty-year-old operator with a failed board may not be worth the board; a solid gate with one bad sensor almost always is. We tell you which side of that line your gate is on before you commit.

How to Save on Gate Repair

The cheapest gate repair is the one you catch early. What starts as a slow drag or a hesitant swing turns into a burned-out motor if it’s ignored, and the motor is the expensive part. Call when something first feels off, not when the gate stops moving entirely.

  • Get a free written estimate before work starts. We diagnose first, then quote. You’ll know the price before anyone touches a wrench, and there’s no cost to find out what’s wrong.
  • Fix the small stuff while we’re there. A sticky latch or a worn roller is cheap to swap during a repair visit. Left alone, a dragging gate wears out the operator and doubles the job.
  • Keep the gate path clear. Dirt, leaves and debris under a sliding gate cause drag that strains the motor. A quick sweep keeps the mechanism moving freely.
  • Don’t run a failing operator. If the gate is grinding, stalling or reversing on its own, stop cycling it. Every forced cycle drives wear deeper into the motor and board.
  • Ask about repair vs. replace honestly. If a replacement makes more sense than a repair, we’ll say so. If a repair will get you years more out of a solid gate, we’ll say that too.

To get a free estimate for your gate, call (855) 799-8573. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Need a price for your gate repair?Free estimate, price agreed before work starts
Call (855) 799-8573

Why Diagnostic Skill Changes the Price

A gate repair quote is only as good as the diagnosis behind it. Homeowners and property managers in Antioch call us most often because a gate has stopped working or is behaving erratically, and they can’t immediately tell which brand the operator is, let alone what’s failed. That’s exactly the gap a multi-brand specialist fills. We’ve built certified working knowledge across nine major brands, so the first visit is spent diagnosing the actual fault instead of guessing at unfamiliar equipment or pushing a replacement because the operator is unfamiliar.

This is where a good diagnosis saves real money. A gate that won’t close might be a misaligned photo-eye, a failed loop detector, a bad board, or a motor on its way out. The price gap between those outcomes is large, and the right answer comes from testing the system in order, not from swapping parts until something works. From broken hinges to failed operators, we assess what the gate actually needs. That’s the difference between a repair that holds and a repair that comes back. Our approach on every job is the same: diagnose first, then fix, then confirm the gate is back in service before we leave.

Because we handle manual gate repair, electric and automated gate repair, and new gate installation, you don’t need to coordinate a separate welder, electrician and automation company. One call covers it. If you’re weighing a new gate against another round of repairs, our Gate Repair Antioch overview is a good place to start.

Same-Day Repair

Gate failures rarely wait for a convenient moment, and an open gate on a commercial property or an HOA entrance creates a security and access problem the same day. We book same-day service where the schedule allows, and we dispatch Sunday through Friday, 7am to 7pm. If you call outside dispatch hours, we answer 24/7 and your call is booked into the next opening, Sunday through Friday, 7am to 7pm. The price is set per job by the written estimate, so there’s no surprise attached to getting us out quickly.

FAQs – Gate Repair Cost

How much does gate repair cost in Antioch?

Gate repair in Antioch typically costs $150 to $650 for mechanical work and $275 to $1,200 for electric or automated system repair. The exact figure depends on whether the fault is a hinge, a sensor, a control board or the motor itself. Call (855) 799-8573 for a free estimate.

Is it cheaper to repair or replace an electric gate operator?

Repair is usually cheaper: a sensor or board fix runs $200 to $750, while a full operator replacement runs $750 to $1,200+. Whether replacement wins out depends on the operator’s age and wear. If the motor is sound and one component failed, repairing is almost always the better call. Call (855) 799-8573 and we’ll diagnose which side your gate is on.

How much does electric gate repair cost in Antioch?

Electric gate repair in Antioch typically runs $275 to $1,200 depending on the brand and the failed part. Safety sensors and loop detectors sit at the low end, control boards in the middle, and motor or full operator work at the top. Estimates are free. Call (855) 799-8573.

Can you repair my gate the same day?

Same-day repair is often possible, and we dispatch Sunday through Friday, 7am to 7pm. We answer the phone 24/7, so a call outside dispatch hours is booked into the next opening. Call (855) 799-8573 to check availability for your gate.

Do you charge for estimates?

No, estimates are free. We come out, diagnose the actual fault, and give you a written estimate before any work begins. The price is set per job by that estimate. Call (855) 799-8573 to book yours.

Which brands can you repair?

We work on the brand you already have. Our technicians service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule, with up to 11 years of experience across manual and automated systems. If you’re not sure which brand you have, we’ll identify it on-site. Call (855) 799-8573.

Contact Us for a Free Gate Repair Estimate in Antioch

If your gate is dragging, won’t close, or the operator is behaving oddly, the fastest way to a real number is a call. We diagnose first, then fix, and we handle manual and electric gates for homeowners, HOAs and commercial property managers across Antioch. Every estimate is free, and the written quote sets the final price.

Call (855) 799-8573 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Pricing reflects the Antioch market as of 2026. Gate Repair Antioch offers free estimates – call (855) 799-8573.

What Our Customers Say

★★★★★ 4.8 from 6+ reviews

"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."

- Tara Walsh

"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."

- Neil Patel

"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."

- Adriana Ramirez
Need Gate Repair help in Antioch? Licensed & insured · 30-60 min response · free estimates
Call (855) 799-8573

Request a Free Estimate

Tell us what's going on in Antioch. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7