Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Antioch, CA
We provide independent Ghost Controls gate repair across Antioch, CA. Ghost Controls builds solar-friendly swing and slide operators for driveways and side yards, and the thing that shapes our work on them here is the ground: Antioch’s expansive clay moves with the seasons and racks gate posts out of plumb, which loads the operator arm in ways the factory never intended.
We’re an independent service provider, not affiliated with or authorized by the manufacturer, and we work on the brand you already have. Our technicians have up to 11 years of experience diagnosing control boards, battery backup systems, and accessory faults on automated gates. Call (855) 799-8573 and we’ll get your gate back in service.
Why Antioch Residents Choose Us for Ghost Controls Service
Most gate companies know one or two operator brands well and guess at the rest. We work across nine of them, including Ghost Controls, so a Ghost Controls arm that binds or a receiver that stops reading remotes isn’t a mystery we have to solve from scratch.
That matters in Antioch because the brand is usually only half the problem. A Ghost Controls operator that runs but won’t move the gate is often fighting a post that has heaved, a wooden gate that has warped in the summer heat, or a hinge bolt that has worked loose. Diagnose first, then fix: we look at the mechanical side and the electronic side together, because fixing one without the other just means the same call again in a few months.
We use quality parts that fit the equipment, explain what we’re replacing and why, and set pricing before any work starts. Scheduling is straightforward. Tell us what the gate is doing and we’ll book a visit across Antioch, whether you’re in a hillside subdivision or an older downtown pocket.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Common Ghost Controls Gate Repair Problems We Solve in Antioch
These are the failures we see most often on Ghost Controls equipment in this city, and how Antioch’s conditions feed into each one.
- Control board failures. Voltage spikes and long exposure to summer heat can take out a board, and the gate starts behaving erratically or shuts down entirely. Boards live in enclosures that bake in direct sun near 100°F, so heat damage is a real pattern here rather than a rare fluke.
- Arm and hinge binding. Expansive clay soil swells in winter and shrinks in summer, tilting posts that were set too shallow and warping wooden gates. When that happens the arm binds against the gate instead of swinging it, and the operator works harder than it should on every cycle.
- Battery backup that won’t hold a charge. Backup batteries age faster in sustained heat, so a gate that used to open during an outage suddenly won’t. We test the battery and the charging circuit separately so you’re not replacing the wrong part.
- Keypad and remote receiver malfunctions. Dust intrusion and UV degradation of plastic housings cause intermittent or dead receivers. If your remotes work some days and not others, the receiver is usually where we start.
- Premature motor gear wear. When a post has shifted and nobody realigns the arm, the motor keeps driving a misaligned load. The gear wears out long before it should, and the gate gets slower and noisier before it stops.
Ghost Controls Service in Antioch: What Local Conditions Mean for Your Equipment
Here’s the local insight that changes how we approach Ghost Controls work in Antioch. In the hillside subdivisions off the Antioch/Oakley ridge, winter soil movement and summer heat combine to rack driveway gates so they drag on the pavement by August. The posts heave and tilt, the swing arm goes out of alignment, and the operator ends up driving a load it was never built for. That’s a problem far less common on flatter, more stable ground, and it’s why a straight arm adjustment often doesn’t last.
When we see that pattern, we re-set the post deeper rather than just tweaking the arm, and we may add a secondary hinge or reinforce the gate frame so the fix holds through another wet winter and another dry summer. On a Ghost Controls swing operator, that mechanical correction protects the motor gear and the control board from the strain that follows a misaligned gate. Fix the ground and the frame, and the electronics stop failing.
Ghost Controls Models & Products We Service in Antioch
We service the full range of Ghost Controls equipment installed on Antioch properties: heavy-duty single swing operators (TDS1 and TSS1 series), dual swing operators for wider driveway openings (TDS2 and TSS2 series), slide gate operators (TSG1 series), and the brand’s solar-compatible and battery backup systems.
We repair, install, and service Ghost Controls equipment with quality parts that fit it. For control boards and motors we use OEM parts to keep compatibility and reliability intact. For hinges and brackets, we’ll sometimes recommend quality aftermarket hardware when the original design is prone to loosening in Antioch’s soil. We’re not a dealer and we don’t sell new systems, so the recommendation you get is about what your gate actually needs. You can read more about our Ghost Controls work and the other brands we handle.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Antioch
Pricing is set per job by a written estimate, and the estimate is free. What drives the number is which system is failing and how much of the mechanical problem is below or around the operator.
An arm realignment and hinge adjustment is a smaller job than a post re-set. A control board replacement is a different job again from a battery and charger diagnosis. Add a warped wooden gate or a frame that needs reinforcing and the scope grows. We look at the gate, the posts, and the operator before we quote, then tell you whether repairing the existing unit is the practical call or whether repeated failures point to a sturdier replacement.
You’ll know the price before we start, and the written estimate sets the final figure. Call (855) 799-8573 for an exact quote on your Ghost Controls gate in Antioch. Estimates are free.
Serving Antioch, CA – Our Local Coverage Area
We serve Antioch and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Antioch
Usually because the operator arm is binding against a gate or post that has shifted, so the motor turns but the drive can’t move the gate. In Antioch the common cause is a post that has heaved in the clay soil, which misaligns the arm. We check the post and the frame before we touch the electronics, because a new board won’t fix a mechanical bind. Call (855) 799-8573 for an exact quote on the repair.
The clay swells in winter and shrinks in summer, which heaves and tilts posts that were set too shallow. That knocks the swing arm out of alignment and makes the operator work against a load it wasn’t designed for. On hillside lots off the Antioch/Oakley ridge the movement is pronounced enough that gates drag on the pavement by late summer. Re-setting the post deeper is often the real fix.
Yes, in many cases a board replacement is all the operator needs. We diagnose first to confirm the board is the failure and not a symptom of a binding arm or a weak battery. If heat damage is evident and the rest of the unit is sound, replacing the board is the practical call. Call (855) 799-8573 and we’ll quote the job.
It can be either, which is why we test both. Batteries age faster in sustained summer heat, so a backup that worked fine two seasons ago may simply be at the end of its life. A failed charging circuit will kill a new battery too, so testing only the battery can send you back to the same problem. We’ll tell you which part failed before replacing anything.
Keep the mechanical side aligned so the motor isn’t working overtime, and don’t ignore a gate that starts dragging or slowing down. A post re-set and a hinge upgrade protect the operator from the strain that leads to gear wear and board failures. We can assess your gate’s alignment and quote any correction. Call (855) 799-8573.
Service Areas Near Antioch
We serve Ghost Controls gate owners across Antioch and the surrounding East Contra Costa communities, including Brentwood, Oakley, Clayton, Discovery Bay, and Blackhawk. If you’re just outside those towns, call and we’ll confirm coverage for your address.
Book Your Ghost Controls Service in Antioch Today
Whether your Ghost Controls operator has stopped dead, is running but not moving the gate, or keeps losing its backup power, one call covers it. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday, means same-day service is often available. Call (855) 799-8573 for a free estimate.
Written by the team at Gate Repair Antioch.